Differences

This shows you the differences between two versions of the page.

--- vatt:vatt_reboot_vatttel [2021/06/13 18:30]
paul created
+++ vatt:vatt_reboot_vatttel [2021/06/16 21:05] (current)
paul
@@ Line 5: / Line 5: @@
 |TCS room|Make sure that M2 PI Controller is off (power switch on the right of the controller's front panel)| |
 |TCS room|Reboot ''VATTtel'': if ''VATTtel'' is running, press tiny ''Reset'' button, wait for the green ''Run'' and ''Pass'' LEDs. The old Guider will not be found.| |
-|TCS room|Booting ''VATTtel'': if ''VATTtel'' is not running, power it on **after checking that GPS is on**. Also note that prior to booting, ''VATTtel'' requires the ''VATTdata'' server to be running. **PEPSI only:** These are the servers that need to be running: ''VATTdata'', ''VATTcontrol'', ''VATTdev'', ''VATTarchive'', ''PEPSI''.| |
+|TCS room|Booting ''VATTtel'': if ''VATTtel'' is not running, power it on **after checking that GPS is on** (''Ready'' and ''Power'' blue LEDs on without flashing). Also note that prior to booting, ''VATTtel'' requires the ''VATTdata'' server to be running. **PEPSI only:** These are the servers that need to be running: ''VATTdata'', ''VATTcontrol'', ''VATTdev'', ''VATTarchive'', ''PEPSI''.| |
 |Instrument room|=) Booting a server after weeks in shutdown may be hard. 8-) **Run all the servers all the time** (outside of lightning shutdown) even if they are unlikely to be needed on the given day.| |
 |TCS room|Watch VATTtel monitor to make sure that the kernel loads from the ''VATTdata'' network server| |

MOON