vatt:vatt_streamlined_warm_startup_checklist
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
|
vatt:vatt_streamlined_warm_startup_checklist [2020/10/01 08:22] paul |
vatt:vatt_streamlined_warm_startup_checklist [2020/10/01 08:44] (current) paul |
|Control room|Start ''TCS_GLUE'' (double click desktop icon) | | | |Control room|Start ''TCS_GLUE'' (double click desktop icon) | | |
|Control room|''TCSglue'' main window: Make sure dome tracking is enabled (left-clicking on the dome-position field toggles between tracking enabled/disabled)| | | |Control room|''TCSglue'' main window: Make sure dome tracking is enabled (left-clicking on the dome-position field toggles between tracking enabled/disabled)| | |
|Control room|''TCSglue'' > ''Mount Control'' tab: Toggle the Telescope Control System's status bit regarding the dome slit: Click the ''Open Slit'' button (it will toggle to ''Close Slit''). The slit will then need to be opened from the dome in due course. **The dome slit control unit is deteriorating. As a consequence, opening the slit must be triggered in the dome. The Telescope Control System's status must anticipate the physical change.**| | | |Control room|''TCSglue'' > ''Mount Control'' tab: Toggle the Telescope Control System's status bit regarding the dome slit: Click the ''Open Slit'' button (it will toggle to ''Close Slit''). The slit will then need to be opened from the dome in due course. **The dome slit control unit is deteriorating. As a consequence, the dome slit motor must be activated in the dome.. The Telescope Control System's status must anticipate the physical change.**| | |
| | | | | | | | | |
|Dome|**Dome procedures**| | | |Dome|**Dome procedures**| | |
vatt/vatt_streamlined_warm_startup_checklist.1601565762.txt.gz ยท Last modified: 2020/10/01 08:22 by paul