MOON

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== (Re)Booting VATTtel ======

^ ^Jun 14, 2021, P Gabor et al.^ ✔✘ ^ 
|Control room|Kill TCSglue if running; ensure that M2 ''Autocollimation'' is off and the M2 Control is disconnected in the INDI-based GUI; kill all GUIs (if any)| |
|TCS room|Make sure that M2 PI Controller is off (power switch on the right of the controller's front panel)| |
|TCS room|Reboot ''VATTtel'': if ''VATTtel'' is running, press tiny ''Reset'' button, wait for the green ''Run'' and ''Pass'' LEDs. The old Guider will not be found.| |
|TCS room|Booting ''VATTtel'': if ''VATTtel'' is not running, power it on **after checking that GPS is on** (''Ready'' and ''Power'' blue LEDs on without flashing). Also note that prior to booting, ''VATTtel'' requires the ''VATTdata'' server to be running. **PEPSI only:** These are the servers that need to be running: ''VATTdata'', ''VATTcontrol'', ''VATTdev'', ''VATTarchive'', ''PEPSI''.| |
|Instrument room|=) Booting a server after weeks in shutdown may be hard. 8-) **Run all the servers all the time** (outside of lightning shutdown) even if they are unlikely to be needed on the given day.| |
|TCS room|Watch VATTtel monitor to make sure that the kernel loads from the ''VATTdata'' network server| |
|TCS room|//after VATTtel boots up, M2 PI Controller will need to be turned on//| |

MOON

User Tools

Site Tools

Page Tools