MOON

	Ash Shutdown/Startup / June 15, 2021 / P Gabor	✔✘
Control room	Use the plot http://abell.as.arizona.edu/~hill/qplot/plots/pms.20210615jhill.jpg (with the date of the second half of the night; authentication on a PostIt note) with caution: It is 10-20 minutes behind.
Control room	Call the LBT operator 520-626-1466. The operator goes by an alarm triggered by the 25um count (LASAIR particle monitor) exceeding 10 counts per cubic foot. The operator does not receive this information from the plot but rather the particle monitor triggers an alarm.
Control room	Monitor LBT's `Enclosure` status (http://info.lbto.org)
Control room	Go out and shine a flashlight to see the ash swirling in the air for verification.

	Shutdown
Control room	Turn off the large dome fan
Control room	TCSglue: Stow the telescope
Control room	TCSglue: Disable drives
Control room	TCSglue: Close mirror cover
Control room	TCSglue: Close dome slit
Basement	Both fans need to be turned off. Therefore, everything needs to be turn off. See Azimuth Hydrostatic Oil Bearing

	Startup
Basement	Bring everything back. See Azimuth Hydrostatic Oil Bearing
Control room	Turn on the large dome fan
Control room	TCSglue: Open dome slit
Control room	TCSglue: Open mirror cover
Control room	TCSglue: Enable drives