User Tools

Site Tools


public:catalinas:bigelow:kuiper_61:troubleshooting:resetting_dome_controller_for_dome_stalls

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
public:catalinas:bigelow:kuiper_61:troubleshooting:resetting_dome_controller_for_dome_stalls [2019/10/14 10:29]
davner created
public:catalinas:bigelow:kuiper_61:troubleshooting:resetting_dome_controller_for_dome_stalls [2019/10/14 10:33] (current)
davner ↷ Page name changed from public:catalinas:bigelow:kuiper_61:troubleshooting:reset_dome_controller_for_dome_stalls to public:catalinas:bigelow:kuiper_61:troubleshooting:resetting_dome_controller_for_dome_stalls
Line 1: Line 1:
 **Last updated ~~LASTMOD~~** **Last updated ~~LASTMOD~~**
 +----
 ======Resetting the Dome Controller====== ======Resetting the Dome Controller======
  
 Procedure to reset the dome controller due to the dome stalling or becoming unresponsive. Procedure to reset the dome controller due to the dome stalling or becoming unresponsive.
  
-  - Locate the dome controller box labeled ''DOME ROTATION'' **IMAGE 1**+  - Locate the dome controller box labeled ''DOME ROTATION''
     * In telescope dome located on North side     * In telescope dome located on North side
   - Turn switch labeled ''240V POWER'' to ''OFF'' position   - Turn switch labeled ''240V POWER'' to ''OFF'' position
Line 12: Line 13:
  
 If this does not correct the issue, please contact the appropriate Mountain Operations staff. If this does not correct the issue, please contact the appropriate Mountain Operations staff.
 +
 +{{:public:catalinas:bigelow:kuiper_61:troubleshooting:dome_controller_box.jpg?nolink&600 |}}
public/catalinas/bigelow/kuiper_61/troubleshooting/resetting_dome_controller_for_dome_stalls.1571074180.txt.gz · Last modified: 2019/10/14 10:29 by davner