MOON

Last updated: 2/15/17

1. Turn off 90Prime CCD and System rotary switches.
2. Turn off Dome Motor Power and Upper Dome Power.
3. Log off of, and manually shut down the following computers - weather, BokCCD2, TCS, guider, Bart, Bokpop and Bok Aux. Note - BokCCD2, Bart, and Bokpop need to shutdown using the KVM switch. Press scroll lock twice and then hit the number associated with the computer.
4. Turn off telescope power, main or aux air compressor, RA oil compressor, RA and DEC preloads.
5. Turn off console power, emergency stop switch, and console UPS. Unplug the UPS.
6. After all the computers are off, turn off printer and 2 UPS in black rack

1. Unplug all the cables with the red tape under the scope after turning off the power supply, guider computer, guider chiller, lamp box.
2. Turn off Dome Motor Power and Upper Dome Power.
3. Log off of and manually shut down the following computers-weather, BokCCD1, TCS, guider, Bart, Bokpop and Bok Aux. Note – BokCCD1, Bart, and Bokpop need to shutdown using the KVM switch. Press scroll lock twice and then hit the number associated with the computer.
4. Turn off telescope power, main or aux air compressor, RA oil compressor, RA and DEC preloads.
5. Turn off console power, emergency stop switch, and console UPS. Unplug the UPS.
6. After all the computers are off, turn off printer and 2 UPS in black rack

1. In the back room:
   1. Unplug 3 AC power cables, 1 twist lock plug on the back wall, disconnect the BNC and Ethernet cable out of the GPS and unplug the GPS. All of these are marked by red tape.
2. On the 2nd floor:
   1. In pier room-turn off UPS in rack, unplug UPS. Remove Ethernet and unplug power cord from Ethernet Injector on wall. All of these are marked with red tape
   2. In office make sure the computer and printer are off/unplugged and Ethernet removed from printer. All of these are marked with red tape.
3. On observing floor:
   1. Turn off and unplug UPS in vacuum room.
   2. Unplug batteries from cordless phones in warm-room.