The hand paddle used at the Schulman Telescope is technically an non-optimized device for the LCOGT controller. The controller (like most of its kind) was designed for semi-professional operation and research and not so much for “starparty” type usage. Thus this paddle has some “features” that should be known before using it.

• The Red button at the top of the paddle is an Emergency Stop (E-Stop) plunger. Pressing this button will de-energize the brakes (causing them to clamp down) and disconnect the drives from the telescope. The E-stop plunger on the telescope controller works in the same way.
• Moving the joystick will send commands to the controller to move the telescope. In this implementation moving the joystick will result in a single commanded JOG (moving the telescope of a set number of arcminutes). The behavior is NOT as is customary with the paddle moving the telescope continuously while using the joystick (like a remote controlled toy or video game). Holding the joystick in a particular direction will not initiate further motion. The joystick must be permitted to return to the neutral (central) position for another JOG. In addition, a first JOG must be completed with the telescope settling to the new position before another JOG will be possible.
• The magnitude of the JOG is determined by adjusting the not-currently-well-named SPEED knob. Recommended JOG magnitudes for centering in an eyepiece are 1-5. The largest jogs move the telescope a degree or more. If the telescope servos are not tuned properly (or the telescope is out-of-balance) this can be problematic.