User Tools

Site Tools


phd2:phd2_guiding_abbreviated

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
phd2:phd2_guiding_abbreviated [2018/10/12 09:17]
scott
phd2:phd2_guiding_abbreviated [2018/11/08 11:38] (current)
tgolota
Line 33: Line 33:
     - near the bottom of the window, turn on the cooler     - near the bottom of the window, turn on the cooler
     - IF YOU ARE GOING TO BE AUTOGUIDING:     - IF YOU ARE GOING TO BE AUTOGUIDING:
-        * click on the "INDI-VATT-GUIDE" TAB+        * click on the "VATT-GUIDE-INDI" TAB
         * click "Connect"         * click "Connect"
         * (a UT clock should appear and begin incrementing.)         * (a UT clock should appear and begin incrementing.)
Line 45: Line 45:
     - click ''Close'' in the ''Connect Equipment'' window     - click ''Close'' in the ''Connect Equipment'' window
     - (OPTIONAL) Set up automatic frame capture:     - (OPTIONAL) Set up automatic frame capture:
-      * Select the ''Global'' tab,+      * Select the ''Global'' tab, it is part of 'advanced setup' (the brain symbol)
       * check ''Enable diagnostic image logging'', then       * check ''Enable diagnostic image logging'', then
       * in the group ''Save Guider Images'' check ''Until this count is reached'', and       * in the group ''Save Guider Images'' check ''Until this count is reached'', and
Line 53: Line 53:
       * The directory ''/home/vattobs/PHD2/PHD2_CameraFrames...'' is automatically created for the session.       * The directory ''/home/vattobs/PHD2/PHD2_CameraFrames...'' is automatically created for the session.
       * If you need to capture more than 100 images, make a renamed copy of the session directory; new   //fits// files should start populating the original sesson directory.       * If you need to capture more than 100 images, make a renamed copy of the session directory; new   //fits// files should start populating the original sesson directory.
 +  * **Move U-Mirror**
 +     - Use the Secondary App to move the Guide Camera stage so that it is on the U-Mirror. 
   * **Start Imaging:**   * **Start Imaging:**
     - in the bottom left of the PHD2 window there is a button with 2 arrows forming a circle. Click that button.     - in the bottom left of the PHD2 window there is a button with 2 arrows forming a circle. Click that button.
phd2/phd2_guiding_abbreviated.1539361074.txt.gz · Last modified: 2018/10/12 09:17 by scott