User Tools

Site Tools


kuiper:m4k_operators_notes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
kuiper:m4k_operators_notes [2018/08/28 11:14]
mel
kuiper:m4k_operators_notes [2019/03/01 12:15] (current)
davner
Line 1: Line 1:
-=========M4K Operating Notes 7/09/18=========+=========Kuiper Telescope Operating Notes 02/21/2019=========
  
 **Please note, this is not a guide for operating the Mont4k instrument, just the telescope operating system, for more details about the M4K, please go to:** **Please note, this is not a guide for operating the Mont4k instrument, just the telescope operating system, for more details about the M4K, please go to:**
Line 45: Line 45:
      * Plug in and turn on the following in the warm room:      * Plug in and turn on the following in the warm room:
          * The power strip on the west wall (includes new Dome TV Camera)          * The power strip on the west wall (includes new Dome TV Camera)
 +         * The computer racks that were plugged into orange outlet #4 on wall have been plugged into a power strip behind the monitors. Make sure the power strip gets plugged in.
 +         * The CSS monitors (the four monitors mounted on the wall) need power. There is a black power strip labeled that needs to be plugged into the wall.
          * BIGAUX          * BIGAUX
          * All the monitors in the control room (BIGAUX, BIGCCD, Gerard, bigguider, and telescope camera monitor)          * All the monitors in the control room (BIGAUX, BIGCCD, Gerard, bigguider, and telescope camera monitor)
Line 299: Line 301:
   - Complete "End of Normal Night of Observing" shutdown   - Complete "End of Normal Night of Observing" shutdown
   - In Dome   - In Dome
-    * Turn off all instrument electronics, including the camera shutter, and unplug two power strips and CCD power cord from orange plugs under the telescope.   +    * Turn off all instrument electronics, including the camera shutter, and unplug two power strips and CCD power cord from orange plugs under the telescope.  
-    * If in use: shut down laptop computer, and unplug laptop from the orange UPS outlets located near the floor on the platform control console.+    * On the west side, two power strips are now plugged into the two outlets.  Those are what need to be unplugged for lightning shutdown on this side  
 +    * If in use: shut down laptop computer, and unplug laptop from the orange UPS outlets located near the floor on the platform control console 
 +    * The focus is no longer operating off the orange extension cord that plugged into the powerstrip on the south end of the scope, it’s hardwired in, so you don’t have to worry about it
     * Turn off TCS computer using the light switch     * Turn off TCS computer using the light switch
     * Turn off telescope power     * Turn off telescope power
Line 317: Line 321:
     * Unplug printer relay.     * Unplug printer relay.
     * Unplug everything from orange outlets behind observer work station, as well as UPS outlets by the video finder scope monitor     * Unplug everything from orange outlets behind observer work station, as well as UPS outlets by the video finder scope monitor
-    * Unplug computer racks (plugged into orange outlet #4 on wall below emergency stop)+    * The computer racks that were plugged into orange outlet #4 on wall have been plugged into a power strip behind the monitors. Make sure the power strip gets unplugged. 
 +    * The CSS monitors (the four monitors mounted on the wallmust be unplugged. There is a black power strip labeled that needs to be removed from the wall. 
   - In UPS Room, unplug:   - In UPS Room, unplug:
 +    * The emergency stop plug (bright yellow) no longer needs to be unplugged when going into lightning shutdown.
     * GPS     * GPS
-    *Shutdown UPS following instructions posted on board.+    * Shutdown UPS following instructions posted on board.
  
 =========Operating the Exhaust fan========= =========Operating the Exhaust fan=========
Line 351: Line 357:
 **RA:** **RA:**
 {{ :kuiper:20171023_142919.jpg?nolink&600 |}} {{ :kuiper:20171023_142919.jpg?nolink&600 |}}
- 
-======Getting Your Data Off The Telescope Computer====== 
-=====Unix Machines (Linux, Mac, etc.)===== 
-====Secure Copy Protocol (scp)==== 
-FINISH 
  
  
  
kuiper/m4k_operators_notes.1535480045.txt.gz · Last modified: 2018/08/28 11:14 by mel