User Tools

Site Tools


kuiper:lightning_shutdown

This is an old revision of the document!


Lightning Shutdown

  1. Stow the telescope and dome
    • TCS-NG-INDI → Goto Functions → Stow
    • DOME-NG-INDI → Dome Actions → Stow
  2. Disable the telescope: TCS-NG-INDI → Actions → Enable
    • Note: green light will turn red
  3. Close the Mirror Cover
  4. Close the Dome slit
  5. Close the Wind Screens
  6. In Dome
    • Turn off all instrument electronics, including the camera shutter, and unplug from orange outlets under scope (Four available outlets)
    • Turn off TCS computer using the light switch
    • Turn off Telescope power
    • Lower Platform
    • Turn off main power
    • Turn off and unplug laptop in dome
  7. In Control room
    • On BIGAUX double click “shutdown bigpop”, and click Shutdown bigpop when prompted
    • Manually shutdown all computers.
      • Gerard
      • BIGCCD
      • Bigguider
      • BIGAUX
    • Turn Off printer.
    • Turn off and unplug power strip on west wall.
    • Unplug printer relay.
    • Unplug everything from orange outlets behind observer work station
    • Turn off Telcom server box.
    • Unplug computer racks (plugged into orange outlet #4 on wall below emergency stop)
    • Unplug video finderscope from UPS power under the old stereo system.
  8. In UPS Room:
    • Unplug GPS
    • Unplug Emergency Stop Power 110 VAC
    • Shutdown UPS following instructions posted on board.
kuiper/lightning_shutdown.1500398337.txt.gz · Last modified: 2017/07/18 10:18 by mel