This is an old revision of the document!
CHECK for GALIL HANDLES 1) Bring up the GalilTools program 2) Click the blue cross 3) Select 90prime.com (address 10.30.3.31 -p1 42023) 4) Type “TH” for Tell Handles (type all Galil commands are in caps) There should be at least two handles opened by the GalilTools program. One will be a TCP/IP and the other one UDP. This is normal. Any other devices connected to the Galil will open a handle. For example 'bart' will a handle from address 10.30.1.2 . If any other handles are open make note of them. Sometimes rouge handles can be opened by other machines. This used to be common but having a router in front of the Galil has stopped that from happening. Power cycling the Galil will kill all the handles. Always wait 5 minutes for the Galil's router to boot up.
