Go to the blue rack and open the door.
Turn OFF the Pullizis.
Switch MOUNT Pulizzi C/B-1 (white switch) to “off” position.
Switch CAMERA Pulizzi C/B-1 (white switch) to “off” position.
Switch CHILLER Pulizzi C/B-1 (white switch) to “off” position.
Switch LAMP Pulizzi C/B-1 (white switch) to “off” position.
Turn off CCD POWER SUPPLY, top box in blue rack in dome. See Picture 3.
Shut off the APC Smart-UPS RT 1500 by pressing the button with the white circle. See Picture 2.
Unplug the UPS power cord and from wall outlet. See Picture 5.
Unplug the large twist-lock connector (with red tape) from the Telescope Drive Box on the back of the scope. (see Picture 6):
Disconnect camera cable from back of CCD POWER SUPPLY box in blue rack.
Disconnect camera powercable on right.
Unplug BNC cable from the front of the Network Time Adaptor NTA-100 box (labeled NTP Server on top) in blue rack, dome. See Picture 8.
Unplug the RAIN SENSOR connector from the back of the R.A.T. Box in blue rack, dome. See Picture 9.
Unplug the gray rectangular cable going to the top side of the LANTRONIX box on the left side behind the blue rack. See Picture 10.
Unplug the power strip from wall behind blue rack.
Unplug chiller twist-lock power cord from wall outlet. See Picture 12.