======Guider Camera Specs====== ===Bok guider for 90Prime - 90PrimeGuider=== - Characterized 14Aug06 @ ITL - Gain - 3.4 e/DN - Noise - 12.9 3 - Full Well - 139,000 e unbinned - Dark Current - 3.1 e/pixel/second - Operating CCD temperature: -38C - ARC Gen2 camera controller - Guider dewar 1 - Detector serial number - sn2944 - Pixels: 512x512 15x15 microns - Device type: 512FT ===Bok guider for BCSpec - BokCassGuider=== * Characterized 15Mar07 @ ITL * Installed 18Mar07 * Gain - 3.1 e/DN * Noise - 18 e * Full Well - 76,000 e unbinned * Dark Current - 4.5 e/pixel/second * Operating CCD temperature: -37C * Magellan/ITL camera controller * Guider dewar 4 * Detector serial number - sn3010 * Pixels: 512x512 15x15 microns * Device type: 512FT ===Kuiper (61") guider - BigGuider=== * Characterized 25Mar08 @ ITL * Gain - 2.6 e-/DN * Noise - 8.8 e- * Full Well - 103,000 e- unbinned * Dark Current - 126 e-/pixel/second * Operating CCD temperature: -43C * ITL/Magellan camera controller * Guider dewar 11 * Detector serial number - sn4134 * Pixels: 512x512 15x15 microns * Device type: MIT/LL CCID-37 ===MMT guider - MMTGuider=== * Characterized 16Jun06 @ ITL * Gain - 3.6 e/DN * Noise - 5.3 e * Full Well - 103,000 e unbinned * Operating CCD temperature: -37 C * ARC Gen3 camera controller * Guider dewar 7 * Detector serial number - sn4135 * Pixels: 512x512 15x15 microns * Device type: MIT/LL CCID37 ===SPOL guider - SPOLGuider=== * E2V CCD57 ===Steward Guider Technical Info=== ==PC Setup== * Turn off firewall * Turn off Windows update * Perform all updates manually * Make sure ControllerServer service is running * Set IP address * Check that the dewar temperature is read back from system and reads about 25 C at room temperature * Check that ROI is set so there are no dark edges around the 512x512 image * Copy PC code to backup site * Enable remote Desktop Connection {{ :public:itl:stewardguiderarchitecture.gif?nolink&600 |Guider Architecture}}