**Last updated ~~LASTMOD~~**
----
======Resetting the Dome Controller======

Procedure to reset the dome controller due to the dome stalling or becoming unresponsive.

  - Locate the dome controller box labeled ''DOME ROTATION''
    * In telescope dome located on North side
  - Turn switch labeled ''240V POWER'' to ''OFF'' position
  - Wait for 15 seconds
    * This allows the capacitors to fully drain and clears any faults that were registered
  - Turn switch labeled ''240V POWER'' to ''ON'' position

If this does not correct the issue, please contact the appropriate Mountain Operations staff.

{{:public:catalinas:bigelow:kuiper_61:troubleshooting:dome_controller_box.jpg?nolink&600 |}}