MOON

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

  *If you intend to spend a long time on one target field, it is advisable to collimate the telescope using a star in the vicinity of your science target field.
  *XEPHEM SKY VIEW WINDOW: Identify a collimation object (magnitude < 7). Type the RA-Dec into TomPack Viewer > Main Controls > Sky coordinates, and hit ''Slew & Track''.
  *//Check/optimize telescope focus with science instrument prior to collimation//
  *//"Autocollimation" must be running throughout the collimation & focusing procedure!//
  *Adjust focus with Secondary GUI, taking an exposure with the science camera, and **when using the 4k CCD Imager**, evaluate the distribution curve fit in IRAF xgterm 
  *Guidebox GUI: insert Center field pickoff mirror
  *Use PHD2 to observe the object. 
  *If you need to center the star in the field, use the ''Manual Control'' or the ''Manual Shifts'' (TPView > Main Controls). DO NOT USE GUIDER STAGES TO CENTER OBJECT.
  *Guidebox GUI: defocus to obtain "donut" (offset -30)
  *[[vatt:hexapod|Secondary GUI]]: adjust TipX, TipY to even out light distribution in "donut", re-centering object with paddle
  *Guidebox GUI: refocus (eliminate/adjust offset; it will be a value close to 0)
  *Guidebox GUI: select U-mirror
  *Check/optimize telescope focus with science instrument (after collimation)

MOON

User Tools

Site Tools

Page Tools