MOON

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.


=====Normal Start Up of the Telescope (Warm Start)=====
 
  -Plug in dome shutter motor on the west wall.
  -Turn dome power on at the telescope power box (middle black button).
  -Open shutter using shutter control box on the south wall. Keep hand ready to hit STOP button until fully open. 
  -Unplug shutter motor (or dome won't move).
  -Turn telescope motor on at telescope power box.
  -Power on TCS console/[[21_inch:TCS GUI|GUI]] computer.
  -Login "21inch", password - leave blank, hit enter.
  -Switch telescope control to remote on the telescope power box. 
  -While computer boots, remove the telescope cover using the handles on the side of the telescope. ((Open the south side first.))
  -Start TCS GUI. Double click icon "TCS GUI 03-24-2008".
  -Click ENABLE (comes up green, turns red when clicked)
  -See instructions on telescope initialization, then start observing.

NOTES:

To stop telescope motion hit STOP (in red)

Dome Stow Position - center of dome over eastern wheel above entry door.

MOON

User Tools

Site Tools

Page Tools