Differences

This shows you the differences between two versions of the page.

--- vatt:mirror_cell_thermal_reader [2014/09/03 09:56]
scott
+++ vatt:mirror_cell_thermal_reader [2014/09/03 10:11] (current)
scott
@@ Line 1: / Line 1: @@
 =====VATT Thermal System=====
-The VATT Thermal System is controlled by an Arduino Mega board located in the mirror cell. It is connected to 7 analog 8D590K thermal sensors. Four of these sensors are located on the telescope struts and 3 are in the mirror cell. The Arduino board communicates with vatttel through an RS-232 serial port. vatttel (TCS) requests the thermal information from each thermal sensor over the serial port by sending a 't' followed a carriage return '\r'. The arduino board then sends a string of white space separated temperatures.
+The VATT Thermal System is controlled by an Arduino Mega board located in the mirror cell. It is connected to 7 analog AD 590K thermal sensors. Four of these sensors are located on the telescope struts and 3 are in the mirror cell. The Arduino board communicates with vatttel through an RS-232 serial port. vatttel (TCS) requests the thermal information from each thermal sensor over the serial port by sending a 't' followed a carriage return '\r'. The arduino board then sends a string of white space separated temperatures.

MOON