Differences

This shows you the differences between two versions of the page.

--- public:kitt_peak:bok_90:bok_server_commands_and_requests [2021/01/20 01:35]
davner created
+++ — (current)
@@ Line 1: / Line 1: @@
-# telescope-server
-Server that handles the dirty work of converting various CBW, NG, and ITHX devices into a simple to use NG protocol end. When users need the latest data from a device use this.
-## NG
-Depending on the telescope site, the obsserver ID is:
-```
-BOK
-VATT
-BIG
-```
-The system ID will always be:
-```
-SERVER
-```
-An example of an NG request at the Bok is:
-```bash
-dan@lump: ~
-$ echo "BOK SERVER 123 REQUEST LEGACYTCS" | nc 10.30.1.5 5750
-BOK SERVER 123 0 07:44:48.20 +31:50:44.7 +00:00:02 07:46:11 90.0 -56.3 1.00 D2000.000 2459234.8 1 -142.5 07:13:02.4
-```
-### NG Commands @ Bok
-```
-```
-### NG Requests @ Bok
-```
-CBWWIND        Wind information from SuperLOTIS
-                    Args: N/A
-                    Notes: Will return empty values as '--'
-                    Units: Speed = mph Dir = degrees
-                    Returns: [SPD DIR GUS GDIR] or FAILED
-                        SPD (wind speed) = XX.xx
-                        DIR (wind direction) = XXX.xx
-                        GUS (gust speed) = XX.xx
-                        GDIR (gust direction) = XXX.xx
-CBWINOUT       CBW Temperature sensors in and outside the dome
-                    Args: N/A
-                    Notes: Will return empty values as '--'
-                    Units: Temp = f Humdity = %
-                    Returns: [OT] [OH] [IT] [IH] [CT] or FAILED
-                        OT (outside temp) = XX.xx
-                        OH (outside humidity) = XX.xx
-                        IT (inside temp) = XX.xx
-                        IH (inside humidity) = XX.xx
-                        CT (control room temp) = XX.xx
-ITHXMIRRORCELL  Mirror cell ITHX sensors
-                    Args: N/A
-                    Notes: Will return empty values as '--'
-                    Units: Temp, Dew Point = f Humdity = %
-                    Returns: [MT] [MH] MDP] or FAILED
-                        MT (mirror temp) = XX.xx
-                        MH (mirror hum) = XX.xx
-                        MDP (mirror dew) = XX.xx
-ITHXUPPERDOME   Upperdome ITHX sensors
-                    Args: N/A
-                    Notes: Will return empty values as '--'
-                    Units: Temp, Dew Point = f Humdity = %
-                    Returns: [UT] [UH] [UDP] or FAILED
-                        UT (upperdome temp) = XX.xx
-                        UH (upperdome hum) = XX.xx
-                        UDP (upperdome dew point) = XX.xx
-CBWTUBE        Tube cbw
-                    Args: N/A
-                    Notes: Will return empty values as '--'
-                    Units: Temp = f Humdity = %
-                    Returns: [NST] [MT] [90P] or FAILED
-                        NST (north strut temp) = XX.xx
-                        MT (mirror temp) = XX.xx
-P (90Prime temp) = XX.xx
-LEGACYTCS           Telemetry information
-                    Args: N/A
-                    Notes:
-                    Units:
-                    Returns: [MOT] [RA] [DEC] [HA] [LST] [ALT] [AZ] [SECZ] [E] [JD] [DI] [DAZ] [UT] or FAILED
-                        MOT (motion) = X
-		                    RA (right ascension) = HH:MM:SS.ss
-		                    DEC (declination) = +DD:MM:SS.s
-		                    HA (hour angle) =  +HH:MM:SS
-                        LST (local sidereal time) = HH:MM:SS
-                        ALT (altitude) = XX.x
-                        AZ (azimuth) = XXX.x
-                        SECZ (airmass) = X.xx
-                        E (epoch) = EEEE.e
-                        JD (julian date) = JJJJJJJJ.j
-                        DI (dome init) = X
-                        DAZ (dome azimuth) = XXX.x
-		                    UT (universal time) = HH:MM:SS
-IIS                 IIS reading
-                    Args: N/A
-                    Notes:
-                    Units: iis = degrees
-                    Returns: [IIS] or FAILED
-                        IIS (iis) = XXX.xx
-RAOIL               RA oil reading
-                    Args: N/A
-                    Notes:
-                    Units: raoil = psi
-                    Returns: [OIL] or FAILED
-                        OIL (RA oil) = XX.xx
-DOMESHUTTER         Dome shutter state
-                    Args: N/A
-                    Notes:
-                    Units:
-                    Returns: [DSS] or FAILED
-                        DSS (dome shutter state) = OPENED, CLOSED, UNKNOWN
-```

MOON

User Tools

Site Tools

Differences

Page Tools