public:kitt_peak:bok_90:90_lightening_shutdown-long_version
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
public:kitt_peak:bok_90:90_lightening_shutdown-long_version [2017/02/28 16:13] mel |
public:kitt_peak:bok_90:90_lightening_shutdown-long_version [2019/05/09 11:10] (current) davner ↷ Page moved from 90_lightening_shutdown-long_version to public:kitt_peak:bok_90:90_lightening_shutdown-long_version |
||
|---|---|---|---|
| Line 5: | Line 5: | ||
| -Move the telescope to the stow position\\ {{: | -Move the telescope to the stow position\\ {{: | ||
| -Close the primary mirror covers.\\ {{: | -Close the primary mirror covers.\\ {{: | ||
| - | -Close the dome shutter. Hold button until you are sure shutter is closed.\\ {{: | + | -Close the dome shutter. Hold button until you are sure shutter is closed. |
| -Stow the upper and lower wind screens.\\ {{: | -Stow the upper and lower wind screens.\\ {{: | ||
| -Stow the dome.\\ {{: | -Stow the dome.\\ {{: | ||
| Line 13: | Line 13: | ||
| -Turn OFF the " | -Turn OFF the " | ||
| -Switch OFF the telescope control console. | -Switch OFF the telescope control console. | ||
| - | -Turn OFF the “upper dome power” and the “dome motor power” switches.\\ {{: | + | -Turn OFF the “upper dome power” and the “dome motor power” switches. To the right of the AED, unplug one AC cable marked with red tape. This is the dome microphone, and may not have been plugged in.\\ {{: |
| -At the TCS computer, select " | -At the TCS computer, select " | ||
| -Shutdown the TCS computer at Start Menu. | -Shutdown the TCS computer at Start Menu. | ||
| Line 24: | Line 24: | ||
| **Note: everything marked with red tape needs to be unplugged from the bottom of the scope.** | **Note: everything marked with red tape needs to be unplugged from the bottom of the scope.** | ||
| -Turn OFF first (!!) and then unplug: | -Turn OFF first (!!) and then unplug: | ||
| - | -“BCSpec” Power Supply, east side | + | -“BCSpec” Power Supply, east side\\ {{: |
| - | -Autoguider Controller, North side | + | -Autoguider Controller, North side\\ {{: |
| - | -Autoguider Chiller, Northwest side | + | -Autoguider Chiller, Northwest side\\ {{: |
| -“BCSpec” Lamp Power Supply (on instrument itself-unplug (red tape). | -“BCSpec” Lamp Power Supply (on instrument itself-unplug (red tape). | ||
| -Upper IIS readout | -Upper IIS readout | ||
| Line 33: | Line 33: | ||
| -Lower IIS readout (no on/off switch): AC cord identified by red tape. | -Lower IIS readout (no on/off switch): AC cord identified by red tape. | ||
| -BCSpec” Melles Griot Shutter Power Supply (on the B&C instrument itself, not the CCD; there is no on/off switch, just unplug power cord from orange outlet; DO NOT unplug ANYTHING from the CCD camera) | -BCSpec” Melles Griot Shutter Power Supply (on the B&C instrument itself, not the CCD; there is no on/off switch, just unplug power cord from orange outlet; DO NOT unplug ANYTHING from the CCD camera) | ||
| - | -Optoserver (rectangular silver aluminum box, no on/off switch, just unplug). | + | -Optoserver (rectangular silver aluminum box, no on/off switch, just unplug).\\ {{: |
| -Make sure cap is on video finderscope (only if time / storm distance allows)\\ {{: | -Make sure cap is on video finderscope (only if time / storm distance allows)\\ {{: | ||
| ====Control Room: Observers Workstation==== | ====Control Room: Observers Workstation==== | ||
| Line 39: | Line 39: | ||
| -Close any open programs or windows & shut down the following from the Start Menu | -Close any open programs or windows & shut down the following from the Start Menu | ||
| -Weather Computer. | -Weather Computer. | ||
| - | -AzCam Xterm computer | + | -AzCam Xterm computer-note this doesn' |
| -Go to Start, then "Log Out" | -Go to Start, then "Log Out" | ||
| -Click on the HP icon in lower left corner of screen. | -Click on the HP icon in lower left corner of screen. | ||
| - | -BART Xterm computer | + | -BART and Xterm computer |
| - | -Open terminal window and type "sudo shutdown now" | + | -Click on " |
| -Click on the HP icon and select “PowerOff” | -Click on the HP icon and select “PowerOff” | ||
| ====Control Room: Near BokAux & KVM computer==== | ====Control Room: Near BokAux & KVM computer==== | ||
| Line 77: | Line 77: | ||
| -Disconnect phone cable from FAX machine - cord has red tape.\\ {{: | -Disconnect phone cable from FAX machine - cord has red tape.\\ {{: | ||
| -In the second floor pier room (the labeled door is across from the elevator and restroom): | -In the second floor pier room (the labeled door is across from the elevator and restroom): | ||
| - | -Turn off the UPS in the rack by pressing “0” button. | + | -Turn off the UPS in the rack by pressing “0” button.\\ {{: |
| - | -Unplug the UPS AC cord (look for the red tape) from the outlet in the NW corner of room. Picture 28 | + | -Unplug the UPS AC cord (look for the red tape) from the outlet in the NW corner of room.\\ {{:z.jpg? |
| - | -Unplug the Ethernet Injector power cable (look for the red tape) from outlet located chest level in the NW corner of the room. | + | |
| - | -Disconnect the Ethernet cable located above the AC cord (look for the red tape in both cases). | + | |
public/kitt_peak/bok_90/90_lightening_shutdown-long_version.1488323593.txt.gz · Last modified: 2017/02/28 16:13 by mel
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
