public:itl:guider_camera_information
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
public:itl:guider_camera_information [2020/01/28 10:33] davner |
— (current) | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ======Guider Camera Specs====== | ||
| - | ===Bok guider for 90Prime - 90PrimeGuider=== | ||
| - | |||
| - | - Characterized 14Aug06 @ ITL | ||
| - | - Gain - 3.4 e/DN | ||
| - | - Noise - 12.9 3 | ||
| - | - Full Well - 139,000 e unbinned | ||
| - | - Dark Current - 3.1 e/ | ||
| - | - Operating CCD temperature: | ||
| - | - ARC Gen2 camera controller | ||
| - | - Guider dewar 1 | ||
| - | - Detector serial number - sn2944 | ||
| - | - Pixels: 512x512 15x15 microns | ||
| - | - Device type: 512FT | ||
| - | |||
| - | ===Bok guider for BCSpec - BokCassGuider=== | ||
| - | |||
| - | * Characterized 15Mar07 @ ITL | ||
| - | * Installed 18Mar07 | ||
| - | * Gain - 3.1 e/DN | ||
| - | * Noise - 18 e | ||
| - | * Full Well - 76,000 e unbinned | ||
| - | * Dark Current - 4.5 e/ | ||
| - | * Operating CCD temperature: | ||
| - | * Magellan/ | ||
| - | * Guider dewar 4 | ||
| - | * Detector serial number - sn3010 | ||
| - | * Pixels: 512x512 15x15 microns | ||
| - | * Device type: 512FT | ||
| - | |||
| - | ===Kuiper (61") guider - BigGuider=== | ||
| - | |||
| - | * Characterized 25Mar08 @ ITL | ||
| - | * Gain - 2.6 e-/DN | ||
| - | * Noise - 8.8 e- | ||
| - | * Full Well - 103,000 e- unbinned | ||
| - | * Dark Current - 126 e-/ | ||
| - | * Operating CCD temperature: | ||
| - | * ITL/ | ||
| - | * Guider dewar 11 | ||
| - | * Detector serial number - sn4134 | ||
| - | * Pixels: 512x512 15x15 microns | ||
| - | * Device type: MIT/LL CCID-37 | ||
| - | |||
| - | ===MMT guider - MMTGuider=== | ||
| - | |||
| - | * Characterized 16Jun06 @ ITL | ||
| - | * Gain - 3.6 e/DN | ||
| - | * Noise - 5.3 e | ||
| - | * Full Well - 103,000 e unbinned | ||
| - | * Operating CCD temperature: | ||
| - | * ARC Gen3 camera controller | ||
| - | * Guider dewar 7 | ||
| - | * Detector serial number - sn4135 | ||
| - | * Pixels: 512x512 15x15 microns | ||
| - | * Device type: MIT/LL CCID37 | ||
| - | |||
| - | ===SPOL guider - SPOLGuider=== | ||
| - | * E2V CCD57 | ||
| - | |||
| - | ===Steward Guider Technical Info=== | ||
| - | |||
| - | ==PC Setup== | ||
| - | |||
| - | * Turn off firewall | ||
| - | * Turn off Windows update | ||
| - | * Perform all updates manually | ||
| - | * Make sure ControllerServer service is running | ||
| - | * Set IP address | ||
| - | * Check that the dewar temperature is read back from system and reads about 25 C at room temperature | ||
| - | * Check that ROI is set so there are no dark edges around the 512x512 image | ||
| - | * Copy PC code to backup site | ||
| - | * Enable remote Desktop Connection | ||
| - | |||
| - | {{ : | ||
public/itl/guider_camera_information.1580232806.txt.gz ยท Last modified: 2020/01/28 10:33 by davner
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
