Differences

This shows you the differences between two versions of the page.

--- public:catalinas:lemmon:schulman_32:shutdown_procedure [2022/08/24 12:55]
tdeyoe [Main Computer and UPS's]
+++ public:catalinas:lemmon:schulman_32:shutdown_procedure [2022/09/23 11:39] (current)
tdeyoe
@@ Line 1: / Line 1: @@
-====== Schulman Telescope Shutdown Procedure ======
+====== DO NOT USE THIS PROCEDURE ======
 The steps to shutdown the telescope are somewhat the reverse of the [[schulman_telescope_startup_procedure|Startup]] process- but greatly simplified. Knowledge of the Startup process as well as [[public:catalinas:lemmon:schulman_32:using_the_lcogt_gui_and_moving_the_telescope|using the LCOGT GUI and moving the telescope]] are assumed in the steps below.
  ==== Telescope and Dome ====
   - Close the telescope Mirror Covers.
   - Close observatory Dome (if not already closed).
   - Park the telescope (or move it to the park position and turn the tracking off). Make certain telescope is not tracking.
-  - Make sure to leave the telescope in a balanced state. This means either with the camera on or Eyepiece and weights.
+  - Make sure to leave the telescope in a balanced state. This means either with the camera on or the Eyepiece and weights on.
   - Rotate Dome (any method) to chosen safe position. Park position is currently at 59 degrees [[public:catalinas:lemmon:schulman_32:review_of_astronomical_coordinates|Azimuth]].
   - Press the red button on the {{:maxdome_controller_box.jpg?linkonly|dome controller box}} to cut power to it.
-==== Main Computer ====
+==== Main Computer Software ====
   - On the main observatory computer {{:acp_connect.jpg?linkonly|disconnect the telescope via ACP}} (if connected) and TIM unit.
-  - Close any running software on the desktop. (Though do not turn it off yet)
+  - Close any running software on the desktop. (Though do not turn it off the computer just yet)
@@ Line 31: / Line 30: @@
   - Turn the {{:telescope_controller_switch.jpg?linkonly|red controller switch}} to "Off"
-==== Main Computer and UPS's ====
+==== Main Computer Shutdown====
 Now you can turn off the Main Computer via whatever method. Make sure it's off (and not installing updates) before proceeding.
-Turn off the Large UPS (for telescope controller) by pressing the "power" button. The screen indicates the instructions. Unplug the Large UPS from the wall.
+==== UPS Shutdown ====
-{{:public:catalinas:lemmon:schulman_32:power_big_ups_unplug.gif?direct|}}
+Turn off the Large UPS by pressing the "power" button. Turn off small UPS, this requires pressing and holding for a moment.
-Turn off small UPS (for computer and remote power outlets). Unplug from the wall.
+{{:public:catalinas:lemmon:schulman_32:power_big_ups_off.gif?direct|}}
+{{:public:catalinas:lemmon:schulman_32:power_ups_off.gif?direct|}}
+Unplug both UPS's from the wall now that they are off.
+{{:public:catalinas:lemmon:schulman_32:power_big_ups_unplug.gif?direct|}}
 {{:public:catalinas:lemmon:schulman_32:power_ups_unplug.gif?direct|}}
-In Warm room unplug the CAT5 cables that give service to Controller. This is to protect it from any lightning travelling through the Ethernet cable (RIP Phillips in 2019).
+In Warm room unplug the ethernet cable that give service to Controller. This is to protect it from any lightning travelling through the ethernet cable (RIP Phillips in 2019).
+==== It's a Tarp! ====
 Consider covering the Telescope and main computer desk with tarps. The desk should be quite easy but the telescope can be challenging. If you do not have a helper or are simply unable to do so make sure to inform mountain operations.

MOON

User Tools

Site Tools

Differences

Page Tools