This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
public:catalinas:lemmon:schulman_32:schulman_telescope_hand_paddle [2016/11/04 19:07] adam |
public:catalinas:lemmon:schulman_32:schulman_telescope_hand_paddle [2019/06/07 12:03] (current) davner ↷ Page moved from public:lemmon:schulman_32:schulman_telescope_hand_paddle to public:catalinas:lemmon:schulman_32:schulman_telescope_hand_paddle |
||
---|---|---|---|
Line 3: | Line 3: | ||
The hand paddle used at the Schulman Telescope is technically an non-optimized device for the LCOGT controller. The controller (like most of its kind) was designed for semi-professional operation and research and not so much for " | The hand paddle used at the Schulman Telescope is technically an non-optimized device for the LCOGT controller. The controller (like most of its kind) was designed for semi-professional operation and research and not so much for " | ||
- | {{: | + | {{: |
- | * The Red button at the top of the paddle is an Emergency Stop (E-Stop) plunger. Pressing this button will de-energize the brakes (causing them to clamp down) and disconnect the drives from the telescope. The E-stop plunger on the {{: | + | * The Red button at the top of the paddle is an Emergency Stop (E-Stop) plunger. Pressing this button will de-energize the brakes (causing them to clamp down) and disconnect the drives from the telescope. The E-stop plunger on the {{: |
* Moving the joystick will send commands to the controller to move the telescope. In this implementation moving the joystick will result in a single commanded JOG (moving the telescope of a set number of arcminutes). The behavior is NOT as is customary with the paddle moving the telescope continuously while using the joystick (like a remote controlled toy or video game). Holding the joystick in a particular direction will not initiate further motion. The joystick must be permitted to return to the neutral (central) position for another JOG. In addition, a first JOG must be completed with the telescope settling to the new position before another JOG will be possible. | * Moving the joystick will send commands to the controller to move the telescope. In this implementation moving the joystick will result in a single commanded JOG (moving the telescope of a set number of arcminutes). The behavior is NOT as is customary with the paddle moving the telescope continuously while using the joystick (like a remote controlled toy or video game). Holding the joystick in a particular direction will not initiate further motion. The joystick must be permitted to return to the neutral (central) position for another JOG. In addition, a first JOG must be completed with the telescope settling to the new position before another JOG will be possible. | ||
* The magnitude of the JOG is determined by adjusting the not-currently-well-named //SPEED// knob. Recommended JOG magnitudes for centering in an eyepiece are 1-5. The largest jogs move the telescope a degree or more. If the telescope servos are not tuned properly (or the telescope is out-of-balance) this can be problematic. | * The magnitude of the JOG is determined by adjusting the not-currently-well-named //SPEED// knob. Recommended JOG magnitudes for centering in an eyepiece are 1-5. The largest jogs move the telescope a degree or more. If the telescope servos are not tuned properly (or the telescope is out-of-balance) this can be problematic. | ||
+ | * The other knobs and buttons are not currently in service (including the station, " | ||
+ | |||
+ | === NOTE: Paddle Error from Experience! === | ||
+ | |||
+ | If the paddle is ever inadvertently dropped, there is a small chance the E-stop will be pressed. This will do its job and bring the system to a halt- but no sirens will be heard. (It should be possible to hear the brakes clamp down...but in a crowded observatory filled with people this may not be obvious. The E-Stop light on {{: | ||
+ |