User Tools

Site Tools


public:catalinas:lemmon:schulman_32:pre-observing_check

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
public:catalinas:lemmon:schulman_32:pre-observing_check [2023/08/25 13:27]
tdeyoe
public:catalinas:lemmon:schulman_32:pre-observing_check [2023/08/25 13:36] (current)
tdeyoe
Line 1: Line 1:
 ====== Pre-Observing Procedures ====== ====== Pre-Observing Procedures ======
-This procedure is only for when the telescope has been used regularily and was not left in lightning shutdown. If things are obviously a miss (I.E. the power to everything is off) it would be good to perform the [[.:Astrometric_TCS:Startup Procedure|Startup Procedure]].+This procedure is only for when the telescope has been used regularly and was not left in lightning shutdown. If things are obviously a miss (I.E. the power to everything is off) it would be good to perform the [[.:Astrometric_TCS:Startup Procedure|Startup Procedure]].
  
 Before actually performing any steps to get the telescope ready for observing you must check a few things and note any anomalies in the trouble report. These include: Before actually performing any steps to get the telescope ready for observing you must check a few things and note any anomalies in the trouble report. These include:
Line 11: Line 11:
  
 ====== Inside ====== ====== Inside ======
-  * Is the telescope pointing at the Park positionConfirm via [[telescope_orientation_interpretation|Telescope Orientations]]+  * Is the telescope pointing at the Park positionConfirm via [[telescope_orientation_interpretation|Telescope Orientations]]
   * Are the mirror covers open?   * Are the mirror covers open?
   * Is the Flat Field panel on?   * Is the Flat Field panel on?
public/catalinas/lemmon/schulman_32/pre-observing_check.1692995277.txt.gz · Last modified: 2023/08/25 13:27 by tdeyoe