Differences

This shows you the differences between two versions of the page.

--- public:catalinas:lemmon:schulman_32:finding_lost_telescope_position [2023/08/15 11:14]
tdeyoe [Position Star on Main Camera OR in Eyepiece]
+++ public:catalinas:lemmon:schulman_32:finding_lost_telescope_position [2023/08/15 11:21] (current)
tdeyoe
@@ Line 37: / Line 37: @@
 NOTE: If you do not see that button and instead have a ''From RA/Dec'' button it's because you didn't click the ''Use Az/Alt'' radio button instructed before.
 ==== Align from Home Seek ====
+Now that it is calibrated and thinks it is pointing at Park when can align it on the Home Position. Click the ''Align from Home Seek'' under the Alignment section. The telescope will move quickly to a "anchor" point and then continue moving in that direction until it hits the home switches. You will hear an audio cue from each axis noting that it reached home. From this point you can point to your intended target and get back to observing. The pointing should be quite good now. If it is still slightly off you can you use your favorite method to calibrate/sync on an object.
 ===== Calibrate on Bright Star =====

MOON