Differences

This shows you the differences between two versions of the page.

--- normal_operating_instructions [2016/11/03 19:27]
adam
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Normal Operating Instructions for the Schulman 0.8m Telescope ======
-In this case "normal" basically means using the telescope for visual observing (SkyNights programs).
-**Everything that follows assumes the following:**
-    * Telescope Controller is operational and in the normal state. (Telescope servos are on and the telescope has been homed. The telescope is in the ready state to observe.)
-  *   Dome is operational and in the normal state.
-  * Computer does not have other running software, scripts or connections that would interfere with normal operations.
-===== Starting things up =====
-  - Open ACP (see desktop [[desktop_icons_and_software_layout|Layout]]) Under **Telescope** menu select //Connect//.
-      - {{:acp_connect.jpg?600|}}
-      - Upon connecting the heads up screen will show the coordinates of the telescope. Please verify LST and coordinates make sense.
-      - If ACP complains the COM port is not available, it is likely another program is talking to the DOME or Telescope controllers. (e.g. ASCOM Dome software)
-      - Also ACP is set up to command the dome to find **HOME** when first connecting. If ACP was already connected to the telescope and the dome is slaved the dome will not move.
-  - Press the "Dome Control" button to reveal the dome state. It will only allow this once the dome is homed and not moving.
-      - {{:acp2.jpg?600|}} Seeing //Slave//d and reporting the correct Azimuth is a success.
-  - Open the dome by pressing the "Open" button.
-  - After the shutter is open move the telescope to the [[telescope_orientation_interpretation|Zenith]] position (in order to open the mirror covers). Once there the telescope is now tracking.
-      - Press the //Slew or Synch (Catalog)// button to command the telescope to move.
-      - Select to radio button for //Coordinates// and input LST values for the RA coordinates and 32 for Declination.
-          - {{:acp6.jpg?600|}}
-      - Press the //Go To// button to slew to [[telescope_orientation_interpretation|Zenith]].
-  - Open the RCOS TIM software and //Connect//.
-      - {{:tim_connect.jpg?600|}}
-  - //OPEN// the Mirror Covers.
-  - Press the //FOCUSER// icon to be certain the secondary mirror is at the Eyepiece focus position.
-      - {{:tim_focus_eyepiece.jpg?600|}}

MOON

User Tools

Site Tools

Differences

Page Tools