MOON

User Tools

Site Tools

Trace:
21_inch:normal_start_up

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
21_inch:normal_start_up [2016/09/19 15:18]
joe 		21_inch:normal_start_up [2018/03/28 11:03] (current)
mel
Line 1: Line 1:
 =====Normal Start Up===== =====Normal Start Up=====
    
-  -Check to see if weather conditions are safe to observe. +  -Check to see if weather conditions are within safe observing limits. 
-  -Plug in the twist lock AC power cable to the dome shutter motor on the west wall.+  -Plug in the twist lock AC power cable to the dome shutter motor on the south wall.
   -Switch "dome power" to the ON position at the observatory control box (middle black button)located on the south wall of the dome.   -Switch "dome power" to the ON position at the observatory control box (middle black button)located on the south wall of the dome.
   -Open the upper shutter by pressing and releasing the OPEN button on the shutter control box. Be ready to hit the STOP button until the shutter is fully open. When the dome is stowed this box is to the south.    -Open the upper shutter by pressing and releasing the OPEN button on the shutter control box. Be ready to hit the STOP button until the shutter is fully open. When the dome is stowed this box is to the south. 
   -Switch "telescope power" to the ON position at the observatory control box located on the south wall of the dome.   -Switch "telescope power" to the ON position at the observatory control box located on the south wall of the dome.
-  -Unplug the twist lock AC power cable to the dome shutter motor on the west wall (or the dome won't move).+  -Unplug the twist lock AC power cable to the dome shutter motor on the south wall (or the dome won't move).
   -Power on the XEphem computer in the blue rack to the west of the operators table.   -Power on the XEphem computer in the blue rack to the west of the operators table.
-  -When prompted login as "21inch observer", password - check your notes. Hit Enter. +  -When prompted login as "21inch operator", password - check your notes. Hit Enter. 
-  -Switch "dome control" to the remote position on the observatory control box. +  -Switch "dome control" to the remote position on the observatory control box on the south wall. 
   -Open the mirror covers using the handles on the side of the telescope (in the correct order, south side first then north side).   -Open the mirror covers using the handles on the side of the telescope (in the correct order, south side first then north side).
   -Start INDIserver.   -Start INDIserver.
21_inch/normal_start_up.1474323481.txt.gz · Last modified: 2016/09/19 15:18 by joe

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki