21_inch:normal_start_up
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
21_inch:normal_start_up [2016/09/19 14:24] joe |
21_inch:normal_start_up [2018/03/28 11:03] (current) mel |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| =====Normal Start Up===== | =====Normal Start Up===== | ||
| - | -Plug in the twist lock AC power cable to the dome shutter motor on the west wall. | + | |
| + | | ||
| -Switch "dome power" to the ON position at the observatory control box (middle black button)located on the south wall of the dome. | -Switch "dome power" to the ON position at the observatory control box (middle black button)located on the south wall of the dome. | ||
| -Open the upper shutter by pressing and releasing the OPEN button on the shutter control box. Be ready to hit the STOP button until the shutter is fully open. When the dome is stowed this box is to the south. | -Open the upper shutter by pressing and releasing the OPEN button on the shutter control box. Be ready to hit the STOP button until the shutter is fully open. When the dome is stowed this box is to the south. | ||
| -Switch " | -Switch " | ||
| - | -Unplug the twist lock AC power cable to the dome shutter motor on the west wall (or the dome won't move). | + | -Unplug the twist lock AC power cable to the dome shutter motor on the south wall (or the dome won't move). |
| - | -Power on the XEphem computer in the blue rack to the west of the operator' | + | -Power on the XEphem computer in the blue rack to the west of the operators |
| - | -When prompted login as "21inchOperator", password - check your notes. Hit Enter. | + | -When prompted login as "21inch operator", password - check your notes. Hit Enter. |
| - | -Switch "telescope | + | -Switch "dome control" |
| -Open the mirror covers using the handles on the side of the telescope (in the correct order, south side first then north side). | -Open the mirror covers using the handles on the side of the telescope (in the correct order, south side first then north side). | ||
| - | -Start | + | -Start |
| - | -Click ENABLE (comes up green, turns red when clicked) | + | |
| - | -It is highly recommended that you initialize the telescope before you start your observations. | + | |
| + | -Turn on black video finder monitor. | ||
| + | -Remove video camera finder scope lens cap. | ||
| + | -Open large finder scope mirror cover. | ||
| + | -It is highly recommended that you initialize the telescope before you start your observations. | ||
| + | -Record weather conditions before you start observing so you can complete | ||
21_inch/normal_start_up.1474320264.txt.gz · Last modified: 2016/09/19 14:24 by joe
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
