This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
21_inch:normal_shutdown [2016/09/19 14:50] joe |
21_inch:normal_shutdown [2016/09/19 15:09] (current) joe |
||
---|---|---|---|
Line 3: | Line 3: | ||
-Stow the telescope. TCS-NG-INDI → Goto Functions → Stow | -Stow the telescope. TCS-NG-INDI → Goto Functions → Stow | ||
-Close the telescope mirror covers (in the correct order - north first, then south) | -Close the telescope mirror covers (in the correct order - north first, then south) | ||
+ | -Close large finder scope mirror cover | ||
+ | -Place lens cap on video finder scope | ||
+ | -Put away eyepieces | ||
-Stow the dome. Use the hand paddle to center the shutter over the eastern dome rotation wheel above the main entry door to the dome. | -Stow the dome. Use the hand paddle to center the shutter over the eastern dome rotation wheel above the main entry door to the dome. | ||
-Plug in the twist lock AC power cable to the dome shutter motor on the west wall. | -Plug in the twist lock AC power cable to the dome shutter motor on the west wall. | ||
Line 12: | Line 15: | ||
-Close all other open applications, | -Close all other open applications, | ||
-Shutdown the NGTCS computer in blue rack west of operators table. | -Shutdown the NGTCS computer in blue rack west of operators table. | ||
+ | -Turn off black video monitor | ||
-Switch “telescope power” to the OFF position at the observatory control box located on the south wall of the dome. | -Switch “telescope power” to the OFF position at the observatory control box located on the south wall of the dome. | ||
-Switch “dome power” to the OFF position at the observatory control box (middle black button) located on the south wall of the dome. | -Switch “dome power” to the OFF position at the observatory control box (middle black button) located on the south wall of the dome. | ||
-Switch “dome control” to the local position on the observatory control box. | -Switch “dome control” to the local position on the observatory control box. |