MOON

User Tools

Site Tools

Trace:
21_inch:normal_shutdown

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
21_inch:normal_shutdown [2014/06/24 16:39]
joe 		21_inch:normal_shutdown [2016/09/19 15:09] (current)
joe
Line 1: Line 1:
 ===== Normal Shutdown===== ===== Normal Shutdown=====
  
-  -Stow the telescope. In the TCS GUI click on the "Service" tab. Click "Stow" then click the "GOTO" button directly below "RELOAD".+  -Stow the telescope. TCS-NG-INDI → Goto Functions → Stow
   -Close the telescope mirror covers (in the correct order - north first, then south)   -Close the telescope mirror covers (in the correct order - north first, then south)
 +  -Close large finder scope mirror cover
 +  -Place lens cap on video finder scope
 +  -Put away eyepieces
   -Stow the dome. Use the hand paddle to center the shutter over the eastern dome rotation wheel above the main entry door to the dome.   -Stow the dome. Use the hand paddle to center the shutter over the eastern dome rotation wheel above the main entry door to the dome.
   -Plug in the twist lock AC power cable to the dome shutter motor on the west wall.   -Plug in the twist lock AC power cable to the dome shutter motor on the west wall.
-  -Close shutter using shutter control box. +  -Close the shutter by pressing and releasing the CLOSE button on the shutter control box. Be ready to hit the STOP button until the shutter is fully closed. When the dome is stowed this box is to the south. 
-  -Shutdown TCS using "X" in upper right of GUI.  +  -Unplug the twist lock AC power cable to the dome shutter motor on the west wall. 
-  -Shutdown TCS gui computer.  +  -Disable telescope in XEphem. 
-  -Turn off power to telescope drives at the Telescope power box +  -Close Xephem 
-  -Switch dome control to local at the telescope power box.+  -Fill out and send a 21" Trouble Report even if there weren't any problems during the night! 
 +  -Close all other open applications, windows, etc. 
 +  -Shutdown the NGTCS computer in blue rack west of operators table. 
 +  -Turn off black video monitor 
 +  -Switch “telescope power” to the OFF position at the observatory control box located on the south wall of the dome. 
 +  -Switch “dome power” to the OFF position at the observatory control box (middle black button) located on the south wall of the dome.  
 +  -Switch “dome control” to the local position on the observatory control box.
21_inch/normal_shutdown.1403653171.txt.gz · Last modified: 2014/06/24 16:39 by joe

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki